Register    Login    Forum    Search    FAQ

Board index » DSL Internet » Configuring the DSL Modem




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Edgewater EdgeMarc 200aw ADSL2+ modem & VoIP Configuration
 Unread post Posted: Wed Aug 06, 2014 4:03 pm 
Offline

Joined: Wed Apr 29, 2009 5:16 pm
Posts: 24
Edgewater EdgeMarc 200aw is a business Class all-in-one VOIP ADSL2+Wireless G router. It's made for AT&T before but it's factory unlocked after Edgewater original firmware upgrade.

This Edgewater 200aw adsl2+ modem with voip and wireless works great with Acanac ADSL2+ plans (10M or 15M) and the "free" voip phone line. IT DOES NOT work with any DSL plan more than 15M.

Image

Here is the config guide for ADSL , VOIP and Wifi.

1. ADSL setting
First connect a network cable from computer to any of the LAN port of Edgewater 200aw, then open a web browser and visit:

http://192.168.1.1

Username is: root
Password is: default

Go to "ADSL Configuration" and follow the screen shot below, press SUBMIT button to save.
Image

_________________


http://www.CanVOIP.com


Top 
 Profile  
Reply with quote  
 Post subject: Re: Edgewater EdgeMarc 200aw ADSL2+ modem & VoIP Configurat
 Unread post Posted: Wed Aug 06, 2014 4:04 pm 
Offline

Joined: Wed Apr 29, 2009 5:16 pm
Posts: 24
2. VOIP Setting

Here is the simple guide to configuration FXS port of Edgewater 200aw. If you want know how to configure SIP ALG or other advanced features. PLEASE do research on internet yourself.

First please enable the SIP UA
Image

Second configure the basic setting
Image

Third configure the advanced setting
Image

If all set, you should see the "Registered" in Port 1 of SIP UA page. Also you can call in and out if you plug in a phone into phone 1 port.

_________________


http://www.CanVOIP.com


Last edited by sunnyvoip on Wed Aug 06, 2014 4:11 pm, edited 1 time in total.

Top 
 Profile  
Reply with quote  
 Post subject: Re: Edgewater EdgeMarc 200aw ADSL2+ modem & VoIP Configurat
 Unread post Posted: Wed Aug 06, 2014 4:05 pm 
Offline

Joined: Wed Apr 29, 2009 5:16 pm
Posts: 24
3. Wireless Setting

Same as voip port, Wireless is disabled by default. Please enable it first and change the SSID and password to your own SSID and password.

Image


** IMPORTANT** Only TKIP is supported for Wifi encryption. Please change your wireless client setting accordingly. Also please adjust the "Power level" setting if you need strong wireless signal

_________________


http://www.CanVOIP.com


Top 
 Profile  
Reply with quote  
 Post subject: Re: Edgewater EdgeMarc 200aw ADSL2+ modem & VoIP Configurat
 Unread post Posted: Fri Sep 16, 2016 12:11 pm 
Offline

Joined: Wed Apr 29, 2009 5:16 pm
Posts: 24
The wifi function of this router is very weak. Please use it as WIRED ADSL2+ modem with voip, DO NOT use its wifi function if possible.

_________________


http://www.CanVOIP.com


Top 
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
 
Post new topic Reply to topic  [ 4 posts ] 

Board index » DSL Internet » Configuring the DSL Modem


Who is online

Users browsing this forum: No registered users and 6 guests

 
 

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

[ Time : 0.276s | 15 Queries | GZIP : On ]